|
Transmission and Clutch Parts
|
13 tooth, 1 faster pinion $75.00
each
|
Overdrive and Underdrive Sets 10%,
16%, 23%, Overdrives 10%, 20% Underdrives $120 each 26%, 33%, 38%, 43% Overdrives $160.00 each
|
|
We have many popular gear combinations.
All gear sets are $120.00 per set 1st
& Rev 13-17, 13-18,13-19,13-20,13-21,13-22,13-23,13-24 15-17,16-18,17-19,18-19,19-20,20-21,21-22,22-23,23-24,24-25,25-26,26-27,20-22,22-24,24-26,23-25,
|
4 speed trans spacer kit $25.00 each
|
|
Heavy Duty \ Hardened Ring Gear & Pinion
$425.00 each
|
Hardened Top Shaft $85.00
each
|
|
Billet Steel Front Pinion Holder $50.00 each
|
Input shaft
Needle Bearing $25.00 each
|
|
Input shaft Roller Bearing $7.00 each
|
Input Pinion Seal $7.00 each
|
Top Shaft Rear Bearing $25.00 each
|
|
Shifting Forks $125 set
|
Dart Carrier and Axle Set up includes, Carrier, Axles, Clips,
Bearings, Races, Spacer ring, Aluminum Bearing Cups, Axle Tubes with new bearings and Seals. You supply axle tubes for cores. $505.00 Each ( Axle Tube Core Charge $75.00 Plus Shipping) (Use your old ring gear & Pinion or purchase our HD ring gear & Pinion) Will
require some machining in the trans case.
|
Super Saver Set up, Includes 2 sets of gears, Shifting forks,
Hardened Top Shaft, Spacer Kit, Billet Steel Pinion Holder, Input Shaft Needle Bearing. $550.00
Value. Package Price $490.00 You save $60.00
|
Complete 3 or 4 puck clutch set up, Includes driver and HD release arm. $ 360.00 each
|
5\8" Hardened drive Shaft, 18-1\4" long with holes predrilled to fit our clutch set up. Also have 24" shafts with holes
drilled for clutch and you cut to length and drill trans end $25.00ea
|
|
3inch drive shaft coupler $27.00ea
|
Clutch release arms. Stock or Heavy Duty. Heavy duty arms are thicker and longer. Stock $38.00ea HD $52.00ea Specify Wide or Narrow frame
|
|
4 puck clutch disc, This will fit other popular clutch set
ups $80.00 ea
3 puck clutch disc, This will fit other popular clutch
set ups $80.00 ea
1\4" Aluminum clutch disc, This will fit other
popular clutch set ups Replaces stock fiber disc. $21.00
ea
5\8" lock collars $5.00ea
|
Clutch hubs, all hubs are set up for bolts or dial pins Pic Left K-series single cylinder $45.00ea Pic Right
Command V-twin $50.00ea
4 puck clutch pressure plates. Replaces our clutch set up as well as other brands. $50.00ea
3 puck pressure plates, good replacement for stock setups as well as our 3 puck clutch setup. $50.00ea
3 puck, 6 pin clutch driver. Works with our clutch set up as well as others. Will replace stock set up as well. $80.00ea
4 puck, 6 pin clutch driver. Works with our 4 puck clutch
set up as well as others. Will NOT replace
stock set up. $80.00ea Repalcement
pins for 3 or 4 puck driver available $25.00 per set ( 6 Pins )
|
|
1\4" Spiral pins $2.00ea
|
5\8" bore pillow Block bearing for driveshaft $25.00ea
|
|
OEM Throwout Bearings, fits our clutches and stock clutches $40.00ea Also have the long shank w\grease fitting available please specify when placing order
|
OEM Clutch teaser spring $5.00ea
|
|
